Service · Low volume & high mix

Low-volume, high-mix PCB assembly in San Jose.

Small lots are where changeovers eat the schedule and large manufacturers lose interest. Surface Art builds low-volume and high-mix PCB assemblies in San Jose, and every package gets the same engineering review, whatever the lot size.

Surface Art · San Jose, CAUpdated November 20265 min read

Key facts
  • Low-volume and high-mix PCB assembly in San Jose, CA, for first production runs and repeat builds.
  • DFM, DFT and a BOM scrub on every package before the first part is placed, whatever the lot size.
  • Fixtureless flying probe test for small lots; functional and in-circuit test fixtures when a program justifies them.
  • Quotes at each quantity break you need, with your expected annual volume noted.
  • Full turnkey, partial turnkey or consigned parts.
  • 99.81% on-time delivery and a 0.02% return rate, January–June 2026.

What low volume, high mix means

High-mix, low-volume (HMLV) has no formal IPC definition. In practice it means many part numbers, small and variable lots, and frequent engineering changes. It's the normal pattern in industrial, medical, instrumentation, aerospace and defense electronics.

At small lot sizes, setup time drives cost far more than placement speed. A line tuned for long runs is optimized for the wrong variable when lots are small. What matters is fast, verified setups, programs built from clean CAD data, and an engineering review that catches problems before the line starts.

Why small programs get pushed aside

Electronics manufacturing services is a concentrated industry. According to Manufacturing Market Insider, the top 10 EMS providers took 87.6% of top-50 revenue in 2024, and those businesses are built around anchor programs. A common rule of thumb is that a program below about 5% of a plant's revenue is unlikely to be prioritized.

That's about fit, not quality. A high-mix program worth a few million dollars a year is a significant account for a shop Surface Art's size. The full argument, with sources, is in why Surface Art is built for NPI and high-mix, low-volume assembly.

How we run a low-volume build

  • Clarify before quoting. We send a short list of clarifying questions and state our assumptions about quantities, scope and requirements before the quote.
  • Review before a single part is placed. DFM (footprint, package and thermal review), DFT (test-point and coverage analysis) and a BOM scrub (sourcing, lifecycle and cost), plus the datasheet for every part on your BOM.
  • First article. The first boards are checked against the drawing, BOM and centroid data before the rest of the lot continues.
  • Inspect and test. AOI on every build, X-ray for BGAs and other hidden joints, and flying probe for fixtureless electrical test. Functional and in-circuit test fixtures are available for programs that need them.

That review is a big part of how we hold a 99%+ first-pass yield and keep internal rework under 1%. Parts that are easy to find for ten boards aren't always easy to find for a thousand, which is why the BOM scrub looks at sourcing and lifecycle, not just this order.

Process capability

CapabilitySurface Art, San Jose
AssemblySMT, through-hole and mixed technology; hand, wave and selective solder; press-fit
Smallest parts01005 passives · 0.4 mm-pitch BGA · 0.25 mm CSP · fine-pitch QFN
Board sizeUp to 18" × 24"; single, double and high-layer-count boards
Line4 Juki SMT work cells, nitrogen reflow, up to ~171,000 placements per hour
SolderSn63/Pb37 (leaded) and SAC 305 (lead-free)
Inspection & testAOI on every build · X-ray · flying probe · thermal · functional and in-circuit test fixtures
PartsFull turnkey, partial turnkey or consigned
Quality systemISO 9001:2015 · ISO 13485 · IPC-A-610 · UL Registered Firm
RegistrationITAR-registered · woman- and minority-owned small business
Process capability summary. Confirm limits for your specific board with our engineering team.

When your volumes grow

Moving a design between manufacturers means re-qualifying the process and re-learning the board. When your volumes fit our line, we carry the program from low-volume builds into production. When they don't, we'll tell you early, and a clean, documented build makes the move to a volume manufacturer easier.

Offshore assembly usually wins on unit cost at high volume. Low-volume work is different: iteration speed, engineering attention and a stable landed cost matter more, which is the case for building in San Jose.

Getting a quote

How quoting works

Send the BOM as an Excel file with manufacturer part numbers, your Gerber, ODB++ or IPC-2581 data, and a PDF assembly drawing that states your workmanship standard and any special notes. Tell us the quantity breaks you want priced and, if the build repeats through the year, your expected annual volume.

We send clarifying questions and state our assumptions before we quote. Email Sales@surfaceart.com or call (408) 433-4700.

Frequently asked questions

What counts as low-volume PCB assembly?

There is no formal IPC definition. In practice it means small and variable lot sizes, often with many part numbers and frequent engineering changes. We quote each quantity break you need, so the lot size is yours to set.

Do low-volume builds need a test fixture?

Not usually. Flying probe gives fixtureless electrical test, which suits small lots. For programs that justify it, we also build to functional and in-circuit test fixtures.

Do small lots get the same engineering review?

Yes. Every package gets DFM, DFT and a BOM scrub before the first part is placed, and we review the datasheet for every part on the BOM.

How fast can you turn a low-volume build?

It depends on parts availability and how complete the data package is. We give a realistic date after reviewing the package rather than quoting a fixed turnaround.

What happens when our volumes grow?

When your volumes fit our line, we carry the program into production. When they don't, we tell you early, and a clean, documented build makes the move to a volume manufacturer easier.


Start a build

Small lot, lots of part numbers? Send us the package for review.

Schedule a call →
Phone(408) 433-4700
Facility81 Bonaventura Dr, San Jose, CA