- PCB assembly and box build at 81 Bonaventura Dr, San Jose, CA 95134, since 1995.
- 40,000 sq ft facility with 4 Juki SMT work cells and nitrogen reflow.
- ISO 9001:2015, ISO 13485, IPC-A-610, UL Registered Firm and ITAR-registered.
- 99.81% on-time delivery and a 0.02% return rate, January–June 2026, published every six months.
- Prototype, NPI and production when the volume fits; full turnkey, partial turnkey or consigned.
- Woman- and minority-owned small business.
Why build in the Bay Area
Offshore assembly usually wins on unit cost at volume. Building in San Jose wins on other things, and for prototypes, NPI and controlled programs those often matter more.
- Close to your engineers. Your team can walk the line, look at the first board the day it's built, and answer a DFM question the same afternoon. San Jose is 15 to 16 hours behind Shenzhen, so every question sent offshore tends to cost a day.
- No customs entry on every build. Boards assembled here never cross a border, which keeps a program's landed cost stable from first prototype to production. Components are still largely imported, so local assembly reduces tariff exposure but doesn't remove it.
- Your design data stays here. A build means handing over Gerbers, a BOM with part numbers, assembly drawings and often test fixtures. Building locally means you know where that data goes.
- For defense work, it's the law. Assembly and test drawings for ITAR-controlled hardware are technical data, and sending them to a foreign manufacturer is an export that needs authorization. Surface Art is ITAR-registered.
We serve hardware teams across San Jose, Santa Clara, Sunnyvale, Milpitas, Fremont, Palo Alto and the rest of the Bay Area, and customers anywhere in the US. The longer version of this argument is in why Surface Art is built for NPI and high-mix, low-volume assembly.
What we build in San Jose
Programs include satellites and drones, along with aerospace, defense, medical and enterprise compute work. During COVID the line kept running to build ventilators.
For programs that need it, we build on bare boards fabricated by US fabs.
Process capability
| Capability | Surface Art, San Jose |
|---|---|
| Assembly | SMT, through-hole and mixed technology; hand, wave and selective solder; press-fit |
| Smallest parts | 01005 passives · 0.4 mm-pitch BGA · 0.25 mm CSP · fine-pitch QFN |
| Board size | Up to 18" × 24"; single, double and high-layer-count boards |
| Line | 4 Juki SMT work cells, nitrogen reflow, up to ~171,000 placements per hour |
| Solder | Sn63/Pb37 (leaded) and SAC 305 (lead-free) |
| Inspection & test | AOI on every build · X-ray · flying probe · thermal · functional and in-circuit test fixtures |
| Quality system | ISO 9001:2015 · ISO 13485 · IPC-A-610 · UL Registered Firm |
| Registration | ITAR-registered · woman- and minority-owned small business |
| Facility | 40,000 sq ft in North San Jose, CA, in operation since 1995 |
Published delivery and quality
We publish our on-time delivery and return (RMA) rates every six months. For January–June 2026: 99.81% on-time delivery and a 0.02% return rate.
A unit counts as late against the delivery date the customer requested and we quoted. The RMA rate counts every return, not just confirmed workmanship failures, and assigns it to the month the units shipped, so recent months can rise as later returns arrive. The month-by-month table is on the homepage.
The honest trade-off
Local manufacturing doesn't win on unit cost at high volume. The case for building in San Jose is iteration speed, control over your design data, a stable landed cost and, for defense programs, compliance. Prototype close to home, learn fast, and make the volume decision on its merits once the design settles.
When your volumes fit our line, the team that built your prototypes can build your production run. When they don't, we'll tell you early. Small and repeat lots are covered on our low-volume and high-mix assembly page.
Visiting and getting a quote
81 Bonaventura Dr, San Jose, CA 95134 · Get directions · (408) 433-4700 · Sales@surfaceart.com
To quote, send the BOM as an Excel file with manufacturer part numbers, your Gerber, ODB++ or IPC-2581 data, and a PDF assembly drawing that states your workmanship standard and any special notes. We pull datasheets for every part for process review, send a short list of clarifying questions with our assumptions stated, and quote the quantity breaks you need.
Frequently asked questions
Where is Surface Art located?
81 Bonaventura Dr, San Jose, CA 95134, in North San Jose. We have built printed circuit board assemblies there since 1995.
Can my engineers visit the line during a build?
Yes. Bay Area teams can walk the line and look at the first board the day it is built. Call (408) 433-4700 or email Sales@surfaceart.com to set up a visit.
Do you only build for Bay Area companies?
No. We build for hardware teams across the US. Being a short drive away is an advantage for Bay Area teams, not a requirement.
Is PCB assembly in San Jose cheaper than offshore?
Usually not at high volume, and we won't pretend otherwise. The case for building in San Jose is speed of iteration, control over your design data, a stable landed cost with no customs entry on every build, and, for defense work, ITAR compliance.
What certifications does the San Jose facility hold?
ISO 9001:2015 and ISO 13485. We build to IPC-A-610, we are a UL Registered Firm, and we are registered under ITAR with the State Department's Directorate of Defense Trade Controls. See the certificates.